Project: Fatal Fatal1ty

GameDemon · Posted: Mon Dec 04 @ 10:32 pm Post subject: Project: Fatal Fatal1ty

I AM DOING THIS LOG ON 3 SITES Bit-Tech.net,Hardforum.com,Austinmodders.com SO ILL TRY TO UPDATE THEM ALL WHEN I DO 1
Build is on a shuttle
hoping to move my gaming rig stuff into it as soon as i get a better mobo for it
P4 3.0 ht
1 gig ram
ati 9600xt
200gig
+80gig storage

(CURRENTLY LOOKING FOR SPONSORS)
This is my first engraving so please dont bust my chops 2 bad Thanks :rock:

(as you can see im not a god at engraving i tried my best and heres the result)

Cleaned up my engraving some below

and heres 1 of the windows cut out with the view of my engraving

_________________
Project: Fatal Fatal1ty on Austinmodders

GameDemon · Posted: Mon Dec 04 @ 10:35 pm Post subject: Re: Project: Fatal Fatal1ty

Planned is a powdercoated hard drive, powder coated dvd rom drive , possibly powdercoated frame
also i will be using allen bolts to hold the plexi glass windows in so it looks a little but urban and
i might get some mnpctech.com billet case handles (if he orders a new set to be machined)
the plexi will have some dark window tent on it.
_________________
Project: Fatal Fatal1ty on Austinmodders

BR@VO · Posted: Mon Dec 04 @ 10:35 pm Post subject: Re: Project: Fatal Fatal1ty

did you use a diamond bit or the reg engrave bit? the diamond bits work alot better than the norm engrave bits. Looks good though. This is the one you want all the water cooling on the inside right?
_________________
R/S
BR@VO
"If All Else Fails With a store Bought Mod, Mod the Mod"

GameDemon · Posted: Mon Dec 04 @ 10:39 pm Post subject: Re: Project: Fatal Fatal1ty

i started with the small engraving bit and then i cleaned it up with a cone shaped diamond bit and i wish i could do watercooling i cant afford it at the sec Sad

thats why i wish i had a sponsor i would love to do some watercooling

THANKS FOR THE POST!!!
_________________
Project: Fatal Fatal1ty on Austinmodders

PoMan · Posted: Tue Dec 05 @ 10:09 am Post subject: Re: Project: Fatal Fatal1ty

Shoot, I think that engraving looks pretty darn good.

Could you elaborate a little on powdercoating the DVD and Hard drive. I am curious how you are gunna do that....
_________________
No matter how you shake and dance, the last drop always falls in your pants

GameDemon · Posted: Tue Dec 05 @ 10:18 am Post subject: Re: Project: Fatal Fatal1ty

i will powder coat the top metal casing of the dvd drive and the top casing of the hd i have 2 that are the same tops so i pulled one off and im gonna powder coat it and put it on the other drive once its done
_________________
Project: Fatal Fatal1ty on Austinmodders

Mr.Red · Posted: Tue Dec 05 @ 2:59 pm Post subject: Re: Project: Fatal Fatal1ty

I am with Po, I think it looks FINE. And if that is by hand, you are golden man.
_________________
http://www.bf2s.com/player/43396712/

Iralvar · Posted: Tue Dec 05 @ 6:03 pm Post subject: Re: Project: Fatal Fatal1ty

amazing! that is great engraving except the fatal1ty part...lol. Laughing

GameDemon · Posted: Tue Dec 05 @ 7:48 pm Post subject: Re: Project: Fatal Fatal1ty

UPDATE

other window cut windows tinted and partially installed im thinking on painting or powdercoating the case now...

_________________
Project: Fatal Fatal1ty on Austinmodders

BR@VO · Posted: Tue Dec 05 @ 9:34 pm Post subject: Re: Project: Fatal Fatal1ty

Nice, very nice thats gonna be a cool lan kit when your done. You gonna take that thing to a lan and end up getting it sold to some one LoL
_________________
R/S
BR@VO
"If All Else Fails With a store Bought Mod, Mod the Mod"

Mr.Red · Posted: Tue Dec 05 @ 10:56 pm Post subject: Re: Project: Fatal Fatal1ty

lol took me a min to realize that there was a lamp behind the plexi in one of those shots. Looking good.

It might just be the camera angle, but it looks like there are still burs on the cuts?
_________________
http://www.bf2s.com/player/43396712/

GameDemon · Posted: Wed Dec 06 @ 12:09 am Post subject: Re: Project: Fatal Fatal1ty

its camera mainly and i had to redo my windows i realized once i tried my cold cathodes it was 2 dark i had 2 layers of limo on it so im only gonna put 1 layer should work better
_________________
Project: Fatal Fatal1ty on Austinmodders

Lancer · Posted: Wed Dec 06 @ 10:44 am Post subject: Re: Project: Fatal Fatal1ty

Yeah I used 1 layer of Limo on LANtrix and it came out really good. 2 is getting a bit on the dark side.
_________________
Recent Projects:
Harmony
PNY CES 2007

Mr.Red · Posted: Wed Dec 06 @ 11:04 am Post subject: Re: Project: Fatal Fatal1ty

And we cant have your case going to the dark side! Very Happy

...sorry couldnt resist.
_________________
http://www.bf2s.com/player/43396712/

GameDemon · Posted: Wed Dec 06 @ 1:29 pm Post subject: Re: Project: Fatal Fatal1ty

red u always crack me up Razz

for shure in the Texas 10 gallon hat lol
_________________
Project: Fatal Fatal1ty on Austinmodders